1. The lamp rod is an octagonal, twelve -edge, and eighteen edge cones. It is cut, bend, and automatically welded by high -strength high -quality steel plates. Generally, there are specifications such as 25, 30, 35, and 40. It can reach 60 meters per second, and each specification is composed of 3 to 4 sections. With French steel chassis, 1 meter to 1.2 meters in diameter, 30mm thick to 40mm.

   
   

2. 

2. The functionality is mainly based on the frame structure, and the main materials are mainly decorative materials.

3. The electric lifting system consists of an electric motor, a roll -up machine, a three -sets of hot -dip galvanized steel wire rope and cable. The light rod is installed in the body with a lifting speed of 3 to 5 meters per minute.

4. The guidance and unloading system consists of a guide wheel and a guide arm to ensure that the lamp dish does not move horizontally during the lift. When the lamp dish is rising, the lamp can be automatically dropped off and locks from the hook.

5. The lighting electrical appliance system has 6-24 400W -1000W gold halogen (white light), voting, and pan -light lamps. The computer can automatically control the time and part of the lighting or full lighting.

6. Lightning protection system: 1.5 -meter -long lightning protection needle, underground foundation 1 -meter -long grounding wire and welding with underground bolts.